Industrial Shredder Suitable for Processing Wet White Leather Scraps

  • Shan
  • 2026-11-17

In the upstream supply chain of footwear, automotive interiors, and luxury goods manufacturing, tanneries generate large amounts of wet white leather scraps after completing the chrome-free pre-tanning process. As a high-value, chrome-free solid waste, wet white leather is an excellent raw material for collagen extraction, biomass fuel conversion, and recycled leather manufacturing.

Wet White Leather Scraps

However, how to efficiently perform front-end volume reduction and primary shredding on these scraps has always been a technical bottleneck troubling many environmental recycling enterprises.

Based on the pain points mentioned above, the selection of industrial shredders mainly focuses on two solutions:

Low-Speed, High-Torque Twin-Shaft Shredder (The Preferred Solution for Initial Evaluation)

  • Working Principle: Two cutter shafts rotate in opposite directions, tearing the leather scraps apart through shearing and ripping actions.
  • Advantages: Because of the low speed (typically 10-20 rpm), the leather scraps are shredded before they have a chance to wrap around the shafts. The high torque ensures that even a tightly compressed bundle of wet white leather can be directly "bitten" in and torn apart.
  • Disadvantages: The output size cannot be too small, generally above 20mm.

Single-Shaft Shredder with Hydraulic Pusher

  • Working Principle: A single cutter shaft rotates at high speed for cutting, with a hydraulic pusher plate at the rear forcing the leather scraps towards the cutter rotor.
  • Advantages: Smaller and more uniform output size. The hydraulic pusher plate prevents the leather scraps from "slipping" inside the shredding chamber.
  • Disadvantages: Compared to twin-shaft models, the single-shaft blades are more easily wrapped by wet leather materials, potentially requiring higher cleaning and maintenance frequency.

Comprehensive Recommendation

If the main goal is to chop and reduce the volume of wet white leather scraps, the twin-shaft shredder can be prioritized as the testing solution. If subsequent processes require a relatively uniform output size, a single-shaft shredder or a two-stage shredding process can be further evaluated. 

Material Solution

Send your inquiry for further information.

Data is protected with encryption.

TOP