From using agricultural and forestry waste as firewood to using it as electricity, there is a process that must be addressed—pretreatment.Agricultural and forestry waste originally came in various forms: straw was elongated, bark was flaky, and wood scraps were blocky. Directly throw it into the…
READ MORE
Maximum Inclination Angles in the Design of Belt, Chain Plate, and Screw ConveyorsWhen designing bulk material handling systems, one critical factor that significantly affects the efficiency and feasibility of a conveyor is its maximum allowable inclination angle. The inclination angle directly…
READ MORE
Application Differences Between Shaftless and Shafted Screw ConveyorsScrew conveyors are widely used in various industries for the efficient transport of bulk materials. Depending on the material characteristics and operational requirements, there are two main types of screw conveyors: shafted…
READ MORE
In modern organic waste management systems, spiral screw press dewatering machines have emerged as game-changing equipment for moisture reduction. Let's explore the technical capabilities of this innovative technology in transforming food waste from high-moisture byproduct to manageable organic…
READ MORE
Straw fermented Manure is a kind of Organic fertilizer that takes crop straws (wheat, corn, rice, beans, potatoes and other crop straws) as the main raw materials, and undergoes water regulation and microbial fermentation decomposition. Its function is to improve soil fertility, increase the proportion of beneficial microorganisms, and it is also one of the ways of straw resource utilization.There are two main types of microbial straw fermentation processes: aerobic fermentation and anaerobic fermentation.Aerobic Fermentation ProcessAerobic fermentation is the degradation of organic matter under aerobic conditions through the action of aerobic microorganisms. As the temperature of aerobic fermentation is generally between 50-60 ℃, it can also reach as high as 70-80 ℃, making it a high-temperature compost.The straw is crushed into small segments of 1-5cm by a shredder. The straw, feces, and microbial agents can be mixed evenly in a mass ratio of 100:10:0.5, and adjusted to a suitable moisture content (50-70
READ MORE
A lot of waste building templates will be produced in house demolition or industrial production. After the waste building templates are shredded, they can be used as raw materials for bamboo plywood processing factories, wood-based panel factories, composite board factories, paper mills, and as fuel for power plant boilers. Therefore, waste building template has a high recycling value.A shredder will be used to break waste building templates. There will inevitably be nails in waste building templates. Using ordinary shredders will damage the blades of the machine and easily cause downtime. So which equipment to choose for waste building template shredders with nails?Today I would like to recommend such a good device to everyone.GEP ECOTECH specially designed the GDI double-shaft shearing shredder for waste building template with nails, which uses the principle of mutual shearing and tearing between two relatively rotating knives to shred the material. It adopts "double motor + double planetary reducer",
READ MORE
Putting the big blue bucket, paint bucket into the shredder, open conveying processes are not a few. For disposal companies, there are protective measures such as water spraying and fire extinguishers, and air purification measures such as fresh air systems, which have achieved safety and environmentally friendly production. However, one of our American customers has higher requirements for hazardous waste shredding and disposal, which is the newly designed product I am going to talk about today: intelligent building-type hazardous waste shredding system, also called hazardous waste building.GEP ECOTECH's newly designed intelligent building-type hazardous waste shredding system includes lifting feeding system, cache device, closed crushing system, safe discharge system, active fire fighting facilities, passive fire fighting facilities, explosion-proof facilities, and specially designed rapid maintenance system. Multiple protection, layer by layer isolation and sealing operation, to ensure that the entire
READ MORE
Abandoned packaging containers refer to various containers containing or contaminated with toxic hazardous waste or other toxic and harmful substances that have lost their original utilization value or have been abandoned or abandoned during packaging activities, such as waste iron barrels, waste plastic barrels, waste plastic woven bags, etc. After removing the toxic and harmful substances and dirt contained or contaminated in these discarded packaging containers, they can be processed into corresponding recycled packaging containers (such as recycled iron barrels, recycled plastic barrels, recycled packaging bags, etc.) or recycled materials (such as recycled metal materials that meet the requirements of smelting and hardware processing, or recycled plastic materials that meet the requirements of industrial plastic product processing, etc.) to achieve recycling and utilization. During this period, it is necessary to perform pre-treatment on discarded packaging containers, including sorting, residue
READ MORE
Fruit and vegetable waste, like kitchen waste and garden waste, is biodegradable organic waste in municipal solid waste.At present, among the components of urban waste, the proportion of fruit and vegetable waste is gradually increasing, and most of it is not used as a resource and is discarded as garbage, which brings risks to the air, water and human settlements. So how to deal with fruit and vegetable waste without harming the ecological environment and sustainable development?GEP ECOTECH has taken the lead in creating a number of successful cases of organic waste treatment lines, and has rich practical experience in this field. Our organic waste shredder can be used for a variety of organic waste treatment, such as fruit and vegetable waste crushing, food waste crushing, kitchen waste crushing, green waste crushing, domestic waste organic matter crushing, etc.We have a professional team of engineers. According to the characteristics of different materials, we endow the shredder with targeted knife shapes
READ MORE
The GPM series RDF forming machine is a solid waste terminal resource utilization equipment developed by GEP, which combines the advantages of similar products. The original design of pressing wheel, module, anti stuffiness machine, full-automatic oil pump, etc., makes it have the advantages of reasonable structure, high production efficiency, low energy consumption, strong adaptability, simple operation, reliable performance, easy movement, etc., so it is widely used in the production line for resource disposal of industrial leftovers in shoe clothing processing plants, paper scum, domestic garbage, agricultural and forestry waste and other raw materials generated in the processing of Paper mill. The RDF fuel produced is in granular form, with a diameter of 30mm and a length of about 50mm. Its moisture content is controlled at around 13%, and its heat generation is close to that of coal, making it easy to store. It is popular among garbage power plants and cement plants.Structural CompositionThe RDF forming
READ MORE
A large number of scrap gloves will be produced in industrial production, some of which are made of fabric and some are made of rubber. If these scrap gloves are directly incinerated or landfilled, it will be too wasteful. Waste fabric gloves contain a lot of fiber and organic matter, which can be used for incineration to generate electricity after crushing, and rubber gloves can be used to produce rubber particles after crushing. In the process of recycling used gloves, crushing is an unavoidable link, which requires an industrial shredder specially developed for used gloves.The scrap glove shredder that is mostly used now is a double-shaft industrial waste shredder, which uses the working principle of the interaction between the knives to process materials, and has a good shredding effect on soft and hard materials, and can easily shred a large amount of scrap gloves. The equipment is designed with low speed and high torque, which has the characteristics of large shearing force, good shredding effect, low
READ MORE
Oil palm husk are very rich in resources in Malaysia, Indonesia and other places, which can be described as "pile up like mountains". These discarded oil palm wastes are excellent fuel raw materials for biomass power plants, and they are relatively cheap to purchase. Palm fruit bunches are large in size, and the pre-treatment of granulation into fuel is to reduce the volume size first, squeeze out part of the water, and do sufficient pretreatment for the next granulation process. This process uses shredders suitable for shredding palm husk. Below we will recommend a well-received GDB two-shaft shredder to shred oil palm husk.The advantages of GDB two-shaft shredder to shred oil palm husk can be simply summarized as follows:large capacityOutput controllableKnives are corrosion resistantAutomatic flip, emergency pause functionHigh degree of intelligence, remote controlEquipped with dust suppression equipment to improve the working environment The shredding of oil palm husk before transportation can greatly
READ MORE
In life and production, iron barrels are usually used to store or transport various substances. Once the use is over, these waste iron barrels need to be disposed of. The dry crushing of waste iron barrels is to use a crushing mechanical equipment to break the iron barrels into smaller and uniform particles. Dry crushing of waste iron barrels is one of the common ways to deal with these waste iron barrels, which has the following advantages:High efficiency and energy saving: The dry crushing process of waste iron drums is simple, the equipment maintenance cost is low, it can efficiently crush iron drums, and can quickly process a large number of waste iron drums. The use of dry crushing can also avoid corrosion of equipment caused by moisture and pollution of the environment, ensuring environmental hygiene.Uniform particle size: The dry crushing of waste iron drums can break the iron drums into uniform small particles, which is convenient for subsequent processing and recycling. The production of small
READ MORE
Introduction:With the increasing population and rapid urbanization, the usage of disposable products is also on the rise. Among them, diapers are a necessity for infants and adults alike, but the disposal of diaper scraps poses a challenge as they are not easily recyclable or handled efficiently. In an effort to address this issue, researchers and companies are exploring the feasibility of utilizing diaper scraps as fuel rods, reducing waste and promoting environmental benefits.Paragraph 1: The Challenges of Diaper Scrap ManagementDiaper scrap management primarily involves difficulties in recycling, high disposal costs, and environmental concerns. Traditional disposal methods, such as landfilling or incineration, have limitations and environmental risks. Therefore, transforming these scraps into a usable resource has become a research focus.Paragraph 2: The Principles of Converting Diaper Scraps into Fuel RodsThe process of converting diaper scraps into fuel rods involves several steps, including drying,
READ MORE
GD5, a small shredder developed by GEP ECOTECH, is often used to crush beverage cans, iron filings, copper wires, scrap parts and other metals. The price of small metal shredder machine will vary with different configurations, and the average price is around 50,000 US dollars. Let's take a brief look at this device.The parameters of GD5 shredderCapacity: 2-8 tons/hourOutput: 30-200mmPower: 10-45kwSize: 2100×1000×1900 (can be customized according to the actual situation)Advantages: wear-resistant cutter, multi-combination seal, anti-winding function, automatic shutdown mechanisms, emergency stop buttons, or overload protectionFactors affecting the price of GD5 shredderThe price of a GD5 shredder can be influenced by several factors. Here are some key factors that affect the price:Motor Power: The power and efficiency of the motor used in the shredder can affect its price. Shredders with higher horsepower or more advanced motor technology tend to be more expensive.Additional Features and Customization Options
READ MORE
The shredding of domestic waste before incineration can provide benefits, although not always necessary for the incineration process. Domestic waste shredded before incineration can enhance the incineration process's efficiency, primarily by reducing the size of the waste.The burning chamber of the incinerator, also known as the furnace, has a limited capacity. Therefore, when the household waste items are massive, such as appliances or furniture, it may be necessary to shred the waste to optimize the incineration process's operation. When domestic waste is shredded, the waste's size is reduced, which allows the material size to fit the furnace's burning chamber efficiently.Additionally, shredding domestic waste before incineration can further improve the incineration process by reducing the risk of incomplete combustion. When only a large chunk of household waste is fed into the furnace, this can create “hot spots,” which reduce combustion efficiency, and result in incomplete combustion of waste.Moreover,
READ MORESend your inquiry for further information.
